Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 70 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm

3920 62 19 32Code to declare

The lowest level of the nomenclature: this code goes in the import declaration. An export declaration needs only the first 8 digits.

This code in Finnish Customs' Fintaric ↗Calculate duties and taxes with Fintaric's calculator ↗Duties, taxes and other measures in the EU's TARIC service ↗

Place in the nomenclature

3900 00 00 00Plastics and articles thereof
3920 00 00 00Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
Of polycarbonates, alkyd resins, polyallyl esters or other polyesters
3920 62 00 00Of poly(ethylene terephthalate)
Of a thickness not exceeding 0,35 mm
3920 62 19 00Other
3920 62 19 32Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 70 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm

On the same level

3920 62 19 05Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm
3920 62 19 08Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either: - only dyed in the mass, or - dyed in the mass and metallised on one side
3920 62 19 28Non-transparent poly(ethylene terephthalate) film: -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 N/cm or more (ASTM D-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm - covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites
3920 62 19 32Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 70 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm
3920 62 19 38Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm
3920 62 19 48Sheets or rolls of poly(ethylene terephthalate): - coated on both sides with a layer of epoxy acrylic resin, - of a total thickness of 37 μm (± 3 μm)
3920 62 19 52Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 µm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D 257 method)
3920 62 19 60Poly (ethylene terephtalate) film: - of a thickness of not more than 20 µm, - coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm
3920 62 19 70Poly(ethylene terephthalate) film in rolls with: -a thickness of 35 μm or more, but not more than 75 μm, -a tensile strength of 40 MPa or more in the machine direction (MD) and 200 MPa or more in the transverse direction (TD), -an elongation at break of 400 % or more in MD and 30 % or more in TD, -a heat shrinkage (in water at 90 °C/10s) in MD of 0,49 % or more, but not more than 0,51 %, -a dynamic heat shrinkage (between 55 °C and 70 °C ) in TD of not more than 20 percentage points, -a light transmittance of 85 % or more, -a haze ratio of not more than 6 %, -a surface tension of 38 mN/m or more, -a density of 1,30 g/cm³ or more, but not more than 1,34 g/cm³, -a shelf life declared by the manufacturer of not less than 12 months
3920 62 19 79Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with -a thickness of 0.07 mm or more but not more than 0.15 mm -a width of 762 mm or more but not more than 1350 mm
3920 62 19 85Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (FCC) (EVA) layer, a 275 µm polyethylene terephthalate (PET) layer and a 25 µm fluorinated polymer (FCC) layer with: -a total thickness of 300 µm or more, but not more than 330 µm, -a tensile strength of 375 N/cm or more in both the longitudinal and transverse directions (ASTM D-882), -a low thermal shrinkage of 1 % or less at 150 °C for 30 minutes, -a low water vapor permeability of 2,5 g/m²•d or less, and -a high breakdown voltage of 18 kV or more and -a partial discharge voltage of 1500 VDC or more (BG/T 123542.2-2009) to be used as a protective layer on the back of photovoltaic modules
3920 62 19 99Other

What is the code used for?

3920 62 19 32 is a TARIC code, the most detailed, ten-digit level of the EU customs tariff. Its first eight digits, 3920 62 19, are the CN code and the first six, 3920 62, the HS subheading.

The code is the lowest level of the nomenclature and is used as it is: an import declaration takes all ten digits (3920 62 19 32), an export declaration only the first eight (3920 62 19).

Duties, VAT, import restrictions and the other measures that apply to the code are in the EU's TARIC service. The search is a guide only; Finnish Customs gives binding decisions on classification (Binding Tariff Information).