Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm

8481 80 59 70Code to declare

The lowest level of the nomenclature: this code goes in the import declaration. An export declaration needs only the first 8 digits.

This code in Finnish Customs' Fintaric ↗Calculate duties and taxes with Fintaric's calculator ↗Duties, taxes and other measures in the EU's TARIC service ↗

Place in the nomenclature

8400 00 00 00Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
8481 00 00 00Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves
8481 80 00 00Other appliances
Other
Process control valves
8481 80 59 00Other
8481 80 59 70Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm

On the same level

8481 80 59 20Pressure regulating valve for incorporation into compressors of motor vehicle air condition units
8481 80 59 30Two-way flow control valve with housing, with: - at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter, - at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate, - at least 19, but not more than 300 MPa operating pressure
8481 80 59 40Flow-control valve - made of steel, - with an outlet hole with a diameter of at least 0,05mm or more, but not more than 0,5 mm, - with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm, - with chromium nitride coating, - with a surface roughness of Rp 0,4
8481 80 59 50Electromagnetic valve for quantity control with - a plunger, - a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2 Ohm
8481 80 59 60Electromagnetic valve for quantity control - with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH
8481 80 59 70Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
8481 80 59 80Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump: -with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector, -with an operating pressure of not more than 5.5 bar, -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a valve's base width of 22 mm or more but not more than 27 mm, -with a valve's length of 55 mm or more but not more than 110 mm, for use in the manufacture of motor vehicle engines
8481 80 59 90Other

What is the code used for?

8481 80 59 70 is a TARIC code, the most detailed, ten-digit level of the EU customs tariff. Its first eight digits, 8481 80 59, are the CN code and the first six, 8481 80, the HS subheading.

The code is the lowest level of the nomenclature and is used as it is: an import declaration takes all ten digits (8481 80 59 70), an export declaration only the first eight (8481 80 59).

Duties, VAT, import restrictions and the other measures that apply to the code are in the EU's TARIC service. The search is a guide only; Finnish Customs gives binding decisions on classification (Binding Tariff Information).