Valve armature: - for the opening and closing of the flow of fuel, - consisting of a shaft and a blade, - with at least 3 but not more than 8 holes on the blade, - made of metal and/or metal alloy(s)

8481 90 00 40Code to declare

The lowest level of the nomenclature: this code goes in the import declaration. An export declaration needs only the first 8 digits.

This code in Finnish Customs' Fintaric ↗Calculate duties and taxes with Fintaric's calculator ↗Duties, taxes and other measures in the EU's TARIC service ↗

Place in the nomenclature

8400 00 00 00Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
8481 00 00 00Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves
8481 90 00 00Parts
8481 90 00 40Valve armature: - for the opening and closing of the flow of fuel, - consisting of a shaft and a blade, - with at least 3 but not more than 8 holes on the blade, - made of metal and/or metal alloy(s)

On the same level

8481 90 00 10For use in certain types of aircraft
8481 90 00 25Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation systems, comprising the following features: -high-pressure die-cast aluminium EN AC-46000, -shot-blasted and machined, -height of 100 mm or more but not exceeding 135 mm, -width of 115 mm or more but not exceeding 150 mm, -weight of 210 g or more but not more than 500 g
8481 90 00 40Valve armature: - for the opening and closing of the flow of fuel, - consisting of a shaft and a blade, - with at least 3 but not more than 8 holes on the blade, - made of metal and/or metal alloy(s)
8481 90 00 50Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
8481 90 00 60Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute
8481 90 00 70Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating
8481 90 00 80Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
8481 90 00 90Other

What is the code used for?

8481 90 00 40 is a TARIC code, the most detailed, ten-digit level of the EU customs tariff. Its first eight digits, 8481 90 00, are the CN code and the first six, 8481 90, the HS subheading.

The code is the lowest level of the nomenclature and is used as it is: an import declaration takes all ten digits (8481 90 00 40), an export declaration only the first eight (8481 90 00).

Duties, VAT, import restrictions and the other measures that apply to the code are in the EU's TARIC service. The search is a guide only; Finnish Customs gives binding decisions on classification (Binding Tariff Information).