Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with: -external toothing in a diametral pitch standard, -17 teeth or more, but not more than 50 teeth, -a diameter of 35 mm or more, but not more than 145 mm, -a length of 200 mm or more, but not more than 1345 mm, -a hardness of 35 HRC or more, but not more than 45 HRC

8483 10 95 30Code to declare

The lowest level of the nomenclature: this code goes in the import declaration. An export declaration needs only the first 8 digits.

This code in Finnish Customs' Fintaric ↗Calculate duties and taxes with Fintaric's calculator ↗Duties, taxes and other measures in the EU's TARIC service ↗

Place in the nomenclature

8400 00 00 00Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
8483 00 00 00Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints)
8483 10 00 00Transmission shafts (including cam shafts and crank shafts) and cranks
8483 10 95 00Other
8483 10 95 30Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with: -external toothing in a diametral pitch standard, -17 teeth or more, but not more than 50 teeth, -a diameter of 35 mm or more, but not more than 145 mm, -a length of 200 mm or more, but not more than 1345 mm, -a hardness of 35 HRC or more, but not more than 45 HRC

On the same level

8483 10 95 10For use in civil aircraft
8483 10 95 30Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with: -external toothing in a diametral pitch standard, -17 teeth or more, but not more than 50 teeth, -a diameter of 35 mm or more, but not more than 145 mm, -a length of 200 mm or more, but not more than 1345 mm, -a hardness of 35 HRC or more, but not more than 45 HRC
8483 10 95 40Stepped shaft made of carbon steel with: -rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15,5' but not more than 0° 21,5', -a largest diameter of 16 mm or more, but not more than 18 mm, -a length of 137 mm or more, but not more than 155 mm, -a weight of 0,12 kg or more, but not more than 0,28 kg
8483 10 95 50Drum shaft for torque transmission, in steel (to SM45C for shaft standard and STS430 for ring standard) with: -a length of 137,8 mm or more but not more than 138,2 mm, -an outer diameter of 23 mm or more but not more than 48,025 mm, -a weight of 1,0245 kg or more but not more than 1,0445 kg, -a hardness of the shaft of 40 or more on the Rockwell C hardness scale (HRC), but not more than 50 HRC, -a ring hardness of 90 or more on the Rockwell B hardness scale (HRB), but not more than 120 HRB, -an external 37-teeth spline with major diameter of 41 mm or more but not more than 48 mm
8483 10 95 90Other

What is the code used for?

8483 10 95 30 is a TARIC code, the most detailed, ten-digit level of the EU customs tariff. Its first eight digits, 8483 10 95, are the CN code and the first six, 8483 10, the HS subheading.

The code is the lowest level of the nomenclature and is used as it is: an import declaration takes all ten digits (8483 10 95 30), an export declaration only the first eight (8483 10 95).

Duties, VAT, import restrictions and the other measures that apply to the code are in the EU's TARIC service. The search is a guide only; Finnish Customs gives binding decisions on classification (Binding Tariff Information).