Brushless synchronous alternating current electric motors with permanent magnets, with: -an output power of 1000 W or more, but not more than 1400 W, -a rotor containing 8 poles, generated by permanent magnets composed mainly of praseodymium-neodymium-iron-boron (GB/T 13560-2017 standard), enclosed in a stainless steel cover, -a motor magnet shaft end outer diameter of 10,001 mm or more, but not more than 10,007 mm, -motor terminals located across the 37,00 mm radius and separated by an angle of 30,00 °, -a motor housing made of ADC12 or EN AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302-2000 or EN 1706 standard), -a back electromotive force constant (Ke) of 0,0265 V-sec/rad or more, but not more than 0,0293 V- sec/rad, -a back electromotive force (EMF) harmonic order - 5th of no more than 0,4 % (of fundamental) and 7th of no more than 0,2 % (of fundamental), -a synchronous inductance of 33,49 µH or more, but not more than 37,01 µH, -a cogging torque of not more than 15 mNm, -a friction torque in ambient temperature of not more than 20 mNm, -a maximum motor operation temperature of not more than 200 °C, -with or without a spline on the motor shaft

8501 52 20 55Code to declare

The lowest level of the nomenclature: this code goes in the import declaration. An export declaration needs only the first 8 digits.

This code in Finnish Customs' Fintaric ↗Calculate duties and taxes with Fintaric's calculator ↗Duties, taxes and other measures in the EU's TARIC service ↗

Place in the nomenclature

8500 00 00 00Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
8501 00 00 00Electric motors and generators (excluding generating sets)
Other AC motors, multi-phase
8501 52 00 00Of an output exceeding 750 W but not exceeding 75 kW
8501 52 20 00Of an output exceeding 750 W but not exceeding 7,5 kW
Other
8501 52 20 55Brushless synchronous alternating current electric motors with permanent magnets, with: -an output power of 1000 W or more, but not more than 1400 W, -a rotor containing 8 poles, generated by permanent magnets composed mainly of praseodymium-neodymium-iron-boron (GB/T 13560-2017 standard), enclosed in a stainless steel cover, -a motor magnet shaft end outer diameter of 10,001 mm or more, but not more than 10,007 mm, -motor terminals located across the 37,00 mm radius and separated by an angle of 30,00 °, -a motor housing made of ADC12 or EN AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302-2000 or EN 1706 standard), -a back electromotive force constant (Ke) of 0,0265 V-sec/rad or more, but not more than 0,0293 V- sec/rad, -a back electromotive force (EMF) harmonic order - 5th of no more than 0,4 % (of fundamental) and 7th of no more than 0,2 % (of fundamental), -a synchronous inductance of 33,49 µH or more, but not more than 37,01 µH, -a cogging torque of not more than 15 mNm, -a friction torque in ambient temperature of not more than 20 mNm, -a maximum motor operation temperature of not more than 200 °C, -with or without a spline on the motor shaft

On the same level

8501 52 20 50AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,With: - an output of 340W or more but not more than 7,4kW, - a flange of dimensions of not more than 180mm × 180mm, and - a length from flange to extreme end of resolver of not more than 271mm
8501 52 20 55Brushless synchronous alternating current electric motors with permanent magnets, with: -an output power of 1000 W or more, but not more than 1400 W, -a rotor containing 8 poles, generated by permanent magnets composed mainly of praseodymium-neodymium-iron-boron (GB/T 13560-2017 standard), enclosed in a stainless steel cover, -a motor magnet shaft end outer diameter of 10,001 mm or more, but not more than 10,007 mm, -motor terminals located across the 37,00 mm radius and separated by an angle of 30,00 °, -a motor housing made of ADC12 or EN AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302-2000 or EN 1706 standard), -a back electromotive force constant (Ke) of 0,0265 V-sec/rad or more, but not more than 0,0293 V- sec/rad, -a back electromotive force (EMF) harmonic order - 5th of no more than 0,4 % (of fundamental) and 7th of no more than 0,2 % (of fundamental), -a synchronous inductance of 33,49 µH or more, but not more than 37,01 µH, -a cogging torque of not more than 15 mNm, -a friction torque in ambient temperature of not more than 20 mNm, -a maximum motor operation temperature of not more than 200 °C, -with or without a spline on the motor shaft
8501 52 20 70Automotive-ready brushless permanently excited magnet synchronous alternating current motor with: -a specified speed of not more than 7000 rpm, -an output of 750 W or more but not more than 1,8 kW (at 12 V), -a flange diameter of 80 mm or more, but not more than 200 mm, -a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end, -a housing length of not more than 265 mm, measured from the flange to the outer end, -a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with O-ring and protective grease or liquid seal interface), -a stator with single T-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets, -whether or not with electronic power steering controller, -whether or not with pulley or coupling, -whether or not with rotor position sensor
8501 52 20 80Electric permanent magnet synchronous motor with: -an output power of 850 W, -a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover, -an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm, -terminals located across the radius 26,2 mm and separated by an angle 30,0°, -a housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard) and anodized coating (per ASTM B580 type E standard), -a back electromotive force constant (Ke) of 0,04009 V-sec/rad or more but no more than 0,04431 V-sec/rad, -a back electromotive force harmonic order - 5th of no more than 0,36 % (of fundamental) and 7th of no more than 0,24 % (of fundamental), -a cogging torque of no more than 20 mNm, -a friction torque in ambient temperature of no more than 26,5 mNm, -a maximum temperature of motor operation of no more than 200 °C
8501 52 20 89Other

What is the code used for?

8501 52 20 55 is a TARIC code, the most detailed, ten-digit level of the EU customs tariff. Its first eight digits, 8501 52 20, are the CN code and the first six, 8501 52, the HS subheading.

The code is the lowest level of the nomenclature and is used as it is: an import declaration takes all ten digits (8501 52 20 55), an export declaration only the first eight (8501 52 20).

Duties, VAT, import restrictions and the other measures that apply to the code are in the EU's TARIC service. The search is a guide only; Finnish Customs gives binding decisions on classification (Binding Tariff Information).