Pressure casted rotor cover of the cooling channel system in the electrical motor: - of EN AC-47100-F aluminum, - with a sealing cap of stainless steel, - shot-blasted and machined, - leakproof to the degree of 1ml per minute or less under 2,75 bar pressure, - with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506), - with a tensile strength of 190 N/mm² or more, - with a height of 42mm or more, but not more than 64mm, - with a diameter of 88mm or more, but not more than 132mm, - with a weight of 0,3kg or more, but not more than 0,5kg

8503 00 98 53Code to declare

The lowest level of the nomenclature: this code goes in the import declaration. An export declaration needs only the first 8 digits.

This code in Finnish Customs' Fintaric ↗Calculate duties and taxes with Fintaric's calculator ↗Duties, taxes and other measures in the EU's TARIC service ↗

Place in the nomenclature

8500 00 00 00Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
8503 00 00 00Parts suitable for use solely or principally with the machines of heading 8501 or 8502
Other
8503 00 98 00Other
Other
8503 00 98 53Pressure casted rotor cover of the cooling channel system in the electrical motor: - of EN AC-47100-F aluminum, - with a sealing cap of stainless steel, - shot-blasted and machined, - leakproof to the degree of 1ml per minute or less under 2,75 bar pressure, - with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506), - with a tensile strength of 190 N/mm² or more, - with a height of 42mm or more, but not more than 64mm, - with a diameter of 88mm or more, but not more than 132mm, - with a weight of 0,3kg or more, but not more than 0,5kg

On the same level

8503 00 98 32Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing
8503 00 98 33Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm
8503 00 98 37Rotor for electric motor, with the rotor cylindrical body made of agglomerated ferrite or sintered neodymium or plastoneodymium, with or without metal shaft and with or without plastic elements: - diameter of the rotor body of 15mm or more but not more than 37mm, - length of the rotor body of 12mm or more but not more than 36mm
8503 00 98 40Pressure casted inner housing of a cooling channel system for an electrical motor: -of EN AC-47100 aluminum, -shot-blasted and machined, -leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, -with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506), -with a tensile strength of 190 N/mm² or more, -with a height of 160 mm or more, but not more than 330 mm, -with a diameter of 240 mm or more, but not more than 368 mm, -with a weight of 3 kg or more, but not more than 5,84 kg
8503 00 98 43Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
8503 00 98 45Armature for the electric motor in starter motors of passenger cars and commercial vehicles with: -an outer diameter of 52 mm or more but not more than 80 mm, -a commutator copper wire diameter of 2 mm or more but not more than 4 mm
8503 00 98 53Pressure casted rotor cover of the cooling channel system in the electrical motor: - of EN AC-47100-F aluminum, - with a sealing cap of stainless steel, - shot-blasted and machined, - leakproof to the degree of 1ml per minute or less under 2,75 bar pressure, - with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506), - with a tensile strength of 190 N/mm² or more, - with a height of 42mm or more, but not more than 64mm, - with a diameter of 88mm or more, but not more than 132mm, - with a weight of 0,3kg or more, but not more than 0,5kg
8503 00 98 55Stator for brushless motor, with: -an internal diameter of 206,6 mm (± 0,5) -an external diameter of 265,0 mm (± 0,2) and -a width of 37,2 mm or more but not more than 47,8 mm of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums
8503 00 98 63Pressure casted outer housing of an electrical motor: - of EN AC-47100 aluminum, - with or without overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel, - shot-blasted and machined, - with or without a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, - with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506), - with a tensile strength of 190 N/mm² or more, - with a height of 195mm or more, but not more than 430mm, - with a width of 290mm or more, but not more than 625mm, - with a length of 270mm or more, but not more than 535mm, - with a weight of 5,2kg or more, but not more than 12,5kg
8503 00 98 73Pressure die-cast electric motor stator housing: -of EN AC-46000 aluminium, -shot-blasted and machined, -with a height of 70 mm or more but not more than 76 mm, -with a width of 155 mm or more but not more than 162 mm, -with a weight of 330 g or more but not more than 360 g
8503 00 98 75Stator body of stacked electrical sheet having: -an inner diameter of 18 mm or more, but not more than 35 mm, -an outer diameter of 35 mm or more, but not more than 65 mm, and -a length of 20 mm or more, but not more than 65 mm -whether or not incorporated in a housing
8503 00 98 99Other

What is the code used for?

8503 00 98 53 is a TARIC code, the most detailed, ten-digit level of the EU customs tariff. Its first eight digits, 8503 00 98, are the CN code and the first six, 8503 00, the HS subheading.

The code is the lowest level of the nomenclature and is used as it is: an import declaration takes all ten digits (8503 00 98 53), an export declaration only the first eight (8503 00 98).

Duties, VAT, import restrictions and the other measures that apply to the code are in the EU's TARIC service. The search is a guide only; Finnish Customs gives binding decisions on classification (Binding Tariff Information).